  | You must register to be able to order and access our pricing |
          |  | |
- Laminar flow type BHG
- Laminar Flow Type BH-EN
- Accessories
- UltraSafe
- Accessories
- Chemfree 2000
- Chemfree 2000 filtration
- Accessories and options for Chemfree 2000
- Vertical BIO laminar-airflow
- Accessories for BIO laminar-airflow
- Horizontal KBN laminar-airflow
- Accessories for KBN laminar-airflow
- Minilab
- TWO 30
- Accessories for TWO 30
- Fume hoods LABOPUR®
- LABOPUR® hoods
- Filters for LABOPUR®
- LABOPUR® accessories
- PCR UV sterilisation cabinet
- Sterilisation cabinet with 2 germicidal UV-lamps
- PCR workstations
- Pyramid® glove boxes
- Filtair®
- Filtres Filtair
- Toxicap®
- Filter Toxicap
- Flowcap™ 700
| LABOPUR® fume hoods for chemicals. Fume hoods provide the user with a secured work space for repetitive manipulations of small chemicals quantities. The dangerous vapors are confined in the enclosure, then are cleansed when they pass through the active charcoal filter. Finally, dangerous vapors are rejected in to the atmosphere without danger for the environment. Thus, the user's health is protected. Norm NF X 15-211, (class 2) is the most demanding regulation today. It guarantees absolute safety, to the user allowing him to focus on his manipulations. To be in accordance with this standard, fume hoods filtration LABOPUR have to meet multiple criteria (summary): -the enclosure must be provided with a ventilation device to maintain the air speed with a rate between 0,4m/s and 0,6m/s. -rejection, flow the filter, of 50% of the VME (mean value of exhibition) of toxics treated in the enclosure in the duration of normal filter use. -the enclosure must have been tested by an approved and independent laboratory. -the class 2 enclosures must allow to treatment of products having a VME index superior or equal to 10ppm. -the class 2 enclosures must be equipped with a sound or visual alarm activated every working 60 hours and also a sampling outlet device. -the class 2 enclosures must not reject more than 50% of the VME flow from the filter during the detection test. -Average face velocity: 0.5 m/s -Nominal voltage: 220-240 volts INCLUDES: -Retention tank -HPL work-top -Velocimeter -Booklet listing little products -Timer: -Outlet -Transparent rear pannel -Manual pump: PMAF -Filter alarm: SFA2 -Reagent tubes: contact us |
 |
|
| |
||