16 924.00 CHF
×
Print or save as PDF
You will be redirected to your browser's interface for printing and saving as a PDF.
Choose the option that's best for you from the "Destination" drop-down menu.
Availability details
041-047864 · CO₂ Incubator Series 8000 DH - Direct Heating THERMO Scientific
Available quantity : 0
The stock indication is not contractual: this data is constantly changing and may vary depending on the quantities requested.
041-047864 · CO₂ Incubator Series 8000 DH - Direct Heating THERMO Scientific
Choice of water jacket (WJ) or direct heating (DH) technology
• Contrôle total de la contamination avec filtre HEPA qui permet l'obtention d'un air classe 100
• Permanent filtration of the chamber air volume to create an aseptic culture atmosphere
• Extraction des particules biologiques aéroportées, principales sources de contamination en laboratoire
• Guaranteed Class 100 air quality within five minutes of closing the door
• Gain de temps grâce à un nettoyage aisé
• Polished stainless steel interior with rounded corners to minimise cleaning time and reduce the risk of contamination
• Minuterie réglable qui avertit lorsque le filtre HEPA facile d'accès doit être remplacé.
• The disposable push-fit fan, stainless steel shelves and brackets and HEPA filters can all be easily removed without tools
• Protection thermique maximale des incubateurs à jaquette d'eau
• Exceptional temperature stability and protection against heat loss over long periods, thanks to the triple-walled structure and thermal inertia of the water for water-jacketed CO2 incubators
• Réduction des temps de récupération de la température : la porte intérieure chauffante à double-vitrage, brevetée, est plus réactive que les portes traditionnelles et limite la formation de condensation.
• Easy to install
Les commandes de la zone de messages de l'incubateur sont intuitives.
The dry contact for remote alarm and digital RH display (optional) allow continuous monitoring, useful for applications requiring a humidity display.
• Le cycle de décontamination à chauffage direct
The direct-heating decontamination cycle (12 hours in total, including 120 minutes at 140°C) eliminates all micro-organisms and fungal spores present on all incubator surfaces (ANSI/AAMI/ISO 11134).
• Choix entre capteur CT ou IR
Select a CT sensor when the chamber temperature and RH are relatively constant. Generally speaking, a CT sensor lasts longer than an IR sensor.
Opt for an IR sensor when temperature and RH levels change frequently. With either sensor, it is essential to maintain a high RH to avoid drying out.
• Contrôle total de la contamination avec filtre HEPA qui permet l'obtention d'un air classe 100
• Permanent filtration of the chamber air volume to create an aseptic culture atmosphere
• Extraction des particules biologiques aéroportées, principales sources de contamination en laboratoire
• Guaranteed Class 100 air quality within five minutes of closing the door
• Gain de temps grâce à un nettoyage aisé
• Polished stainless steel interior with rounded corners to minimise cleaning time and reduce the risk of contamination
• Minuterie réglable qui avertit lorsque le filtre HEPA facile d'accès doit être remplacé.
• The disposable push-fit fan, stainless steel shelves and brackets and HEPA filters can all be easily removed without tools
• Protection thermique maximale des incubateurs à jaquette d'eau
• Exceptional temperature stability and protection against heat loss over long periods, thanks to the triple-walled structure and thermal inertia of the water for water-jacketed CO2 incubators
• Réduction des temps de récupération de la température : la porte intérieure chauffante à double-vitrage, brevetée, est plus réactive que les portes traditionnelles et limite la formation de condensation.
• Easy to install
Les commandes de la zone de messages de l'incubateur sont intuitives.
The dry contact for remote alarm and digital RH display (optional) allow continuous monitoring, useful for applications requiring a humidity display.
• Le cycle de décontamination à chauffage direct
The direct-heating decontamination cycle (12 hours in total, including 120 minutes at 140°C) eliminates all micro-organisms and fungal spores present on all incubator surfaces (ANSI/AAMI/ISO 11134).
• Choix entre capteur CT ou IR
Select a CT sensor when the chamber temperature and RH are relatively constant. Generally speaking, a CT sensor lasts longer than an IR sensor.
Opt for an IR sensor when temperature and RH levels change frequently. With either sensor, it is essential to maintain a high RH to avoid drying out.
Suggested application(s)Incubation and biological culture
MaterialStainless steel
Gross weight142,90 kg
Additional descriptionCO₂ sensor: IR
O₂ sensor: -
O₂ sensor: -
Power supply230 V / 50 - 60 Hz
Temperature5 to 50 °C
DimensionsInternal : 54.1 x 68.1 x 50.8 cm
DimensionsExternal: 66.8 x 100.3 x 63.5 cm
Gross dimensions66,80 x 63,50 x 100,30 cm
WeightNet: 117.9 kg
UNSPSC Code41104425
047864 - BrochureAccessories
Variant(s)
You may be also interested in these categories
The stock indication is not contractual: this data is constantly changing and may vary depending on the quantities requested.