103.00 CHF
×
Print or save as PDF
You will be redirected to your browser's interface for printing and saving as a PDF.
Choose the option that's best for you from the "Destination" drop-down menu.
Availability details
041-096000 · DURAN screw cap GL45 with 2 hose connections (EDPM gasket)
Available quantity : 0
The stock indication is not contractual: this data is constantly changing and may vary depending on the quantities requested.
041-096000 · DURAN screw cap GL45 with 2 hose connections (EDPM gasket)
The system with vacuum hose barb fittings specially developed for connecting soft elastic tubes.
• GL 45 cap connection system for the easy connection of flexible tubing to GL45 bottles
• For the transfer of sterile media from one container to another using a peristaltic pump
• Grey polypropylene cap center rotates freely, allowing the bottle to be unscrewed without the need to disconnect the tubing
• Ideal for use with soft elastic tubing that has an inner diameter of 6 – 9 mm silicone tubing (Viton, Tygon, silicone)
• The 2 polyproplylene connectors have angled top and straight underside connectors
• The curved vacuum hose barb fittings prevent the tubes from bending
• Temperature resistant up to +140 °C
• Fully autoclavable and washer-proof
• Optional sterile venting connector with syringe filter available
• GL 45 cap connection system for the easy connection of flexible tubing to GL45 bottles
• For the transfer of sterile media from one container to another using a peristaltic pump
• Grey polypropylene cap center rotates freely, allowing the bottle to be unscrewed without the need to disconnect the tubing
• Ideal for use with soft elastic tubing that has an inner diameter of 6 – 9 mm silicone tubing (Viton, Tygon, silicone)
• The 2 polyproplylene connectors have angled top and straight underside connectors
• The curved vacuum hose barb fittings prevent the tubes from bending
• Temperature resistant up to +140 °C
• Fully autoclavable and washer-proof
• Optional sterile venting connector with syringe filter available
MaterialCore: polypropylene / Fitting olives: polypropylene / Seal: EPDM
Gross weight0,05 kg
Additional descriptionScrew cap: Yes
Mobile core: Yes
Compatibility: flexible tubes ID 6-9 mm
(Viton, Tygon, silicone)
Mobile core: Yes
Compatibility: flexible tubes ID 6-9 mm
(Viton, Tygon, silicone)
AutoclavableYes
ColourCore: grey
TemperatureUp to 140 °C
DimensionsThread: GL 45
Gross dimensions9,50 x 4,00 x 3,50 cm
UNSPSC Code41121814
096000 - technical Note
Application note - Treatment of laboratory glasswareVariant(s)
You may be also interested in these categories
Screw capCap for microtubeScrew cap for bottleRecessed capWinged capSeptum capStyling capCap for cryotubeTube capSilicone capCap for biobanking tube, storageCap for culture flaskCellulose capAccessory for capAluminium capRubber capGasket for capGlassware capTransfer cap for shaking flaskCap for chromatography flaskTransfer capCap for bottle/container/jerrycanFoam capErlenmeyer capCap for shake flaskDouble position capBlanking capCork capTransfer cap for Erlenmeyer flaskGlass capTransfer cap for culture chamberCap for rollerBottle capPierceable capBottle capA4-BD-A6MRubber cap
The stock indication is not contractual: this data is constantly changing and may vary depending on the quantities requested.