088900 · MUPID-ONE tank and generator 230 V (supplied complete with lid, trays, combs and gel casting set)

Chamber supplied complete with tank, lid, generator, 4 combs, 2 small trays, 1 large tray. With stop switch on the back of the device.

Generator characteristics:
• Voltage: 100 to 240 V AC, international compatibility, 50-60 Hz
• Exit voltage: 135, 100, 50 or 25 V
• Safety detector: photosensor that detects the presence of the lid
• Current regulation: MUPID-ONE controls the voltage to keep the current under its maximum value and ensure its permanent operation
• Timer: can be programmed from 0 to 99 minutes or for permanent operation
• Memory function: the last migration is memorised in time and voltage
• Weight: 410 g
• Dimensions: 75 x 62 x 170 mm

Comb characteristics:
• For 13 or 26 deposits with a multichannel pipette
• Supplied with 4 combs

Characteristics of the tray supports:
• For manufacturing and pouring one large gel or two small ones
• Dimensions: 149 x 20 x 125 mm

Safety lid characteristics:
• UV-transparent material
• Functional, intended for removal with only one hand
• Dimensions: 186 x 35 x 164 mm

Tank characteristics:
• Can be used with multichannel pipettes: inter-well distance of 9 mm for 13 deposits or 4.5 mm for 26 deposits
• The material used for the tank enables direct observation of the samples under UV: 50 % transmission at 254 nm and 80 % at 312 nm
• Easy to clean as the tank can be separated from the generator
• The electrode connectors are zinc-coated
• L x H x l: 183 x 59 x 162 mm
• Buffer volume: 300 - 330 ml

Tray characteristics:
• The trays from all of the MUPID models are compatible with the MUPID-ONE
• 12 cm long tray, supplied as standard with two trays with a migration length of 6 cm
• Heat resistance: the plastic used in the trays makes them resistant to heat
• UV transmission: slightly inferior than that obtained directly with the tank under UV
• Large model dimensions: 130 x 24 x 122 mm
• Small model dimensions: 130 x 16.5 x 59.5 mm