• Max. flow: 1.7 m³/h, ultimate vacuum: 2 mbar • Process times reduced by more than 30 % • High evaporation rate with optimum solvent recovery, thanks to infinitely variable motor speed control • Automatic boiling point determination (e.g. for rotary evaporators, no parameter setting required) • Application: rotary evaporator, vacuum oven, distillation
• High tolerance to vapours • CVC 3000 vacuum controller for automatic vacuum control and regulation. Simple operation thanks to intuitive menu control and plain-text display. Near 100% solvent recovery thanks to high-efficiency vapour condenser • Modular design: a cost-effective solution that can be easily adapted to other applications (e.g. rotary evaporator) • Possibility to connect other components (e.g. ventilation valves and external sensors) • Classic version C: 1x electronic control • Functional version F: 1x electronic control, 1x manual control • Rational version R: 2x electronic control • Compact vacuum unit for controlling two independent vacuum systems • Two vacuum regulators for optimum control conditions • Two solenoid control valves (VACUU-BUS™ control) • Two systems on a single workstation • Non-return valves to prevent influences from one system to another • Joint solvent recovery
• Max. flow: 3.4 m³/h, ultimate vacuum: 1.5 mbar • Excellent chemical resistance • Good ultimate vacuum even with air ballast • Maximum environmental protection thanks to near 100 % solvent recovery • Application: vacuum oven, evaporator concentrator, vacuum network
• Adjustment range: 1080 - 1mbar (Measurement range: down to 0.1mbar) • Intuitive menu control (14 languages) • Exceptional measurement accuracy, capacitive, corrosion-resistant pressure sensor with high long-term stability • Solenoid valve with corrosion-resistant suction line, connectable via DN 16 small flange or DN 6-10mm spigot • CVC 3000 vacuum regulator set for stand mounting, with solenoid valve with suction line and mounted non-return valve, with two end caps, incl. power supply unit • CVC 3000 packages with VV-B 6C automatic shut-off valves, including power supply unit • Pirani principle for measuring the thermal conductivity of gases • Pressure measurement range atm. to 1 x 10⁻² mbar • More details: ± 15% of the displayed value of 100-10⁻³ mbar • Supplied with 2 m of cable and VACUU-BUS™ connectivity
Vacuubrand offers vacuum measurement and control equipment in the 1000 to 10-3mbar range. The best technical and economic choice is available for virtually all applications in this vacuum range. Calibration to order is carried out in a DKD-accredited laboratory (german government calibration body).
• 100% oil-free transfer • Maintenance-free • Connection of pump heads in series for a higher vacuum, or in parallel for increased delivery • For use with rotary evaporators, gel dryers, vacuum and filtration ovens
Fume extraction and neutralisation system. This instrument is composed of a ''Scrubber'' unit that blocks the passage of acid condensation and neutralises the gases in an NaOH solution, and a water re-circulation pump that proportions a large vacuum throughput for sucking up fumes.
• 100 % oil free • Audible level: 45 dBA • ME1C, ME2C NT and ME4C NT with PTFE membranes when chemical resistance is necessary • PTFE sandwich membrane: one PTFE layer, one FPM payer, one fibre layer for excellent chemical and mechanical resistance • Maintenance free
• Suitable for Vacuum filtration, Solvent purification, Solid-Phase Extraction (SPE), Gel electrophoresis • All wetted parts of the Pump in contact with air are made of PTFE material which can resist most of corrosive gases • Without the need of lubrifiant, regular oil changes and maintenance; with no oil pollution • Built-in thermal protection device to shut off the pump automatically when overheated and then resume working when the temperature cools down • The Chemker 411 pump is equipped with a moisture trap and a valve for vacuum adjustment
• Suitable Filtration for microbiology test, Vacuum filtration, Air sampling and Suspended solid test • With vacuum regulator to adjust vacuum • Driven by Piston, without the need of lubricant, regular oil changes and maintenance • Equipped with Prote™ overflow protection which can prevent a large amount of liquid from being sucked into the pump (Excluding 800 and 810 models) • Equipped with filter cartridge in air inlet to filter particle and moisture to prolong the life of pump(as well as in air outlet for 430 and 600models) • Built-in thermal protection device to shut off the pump automatically when overheated and then resume working when the temperature cools down
• Small footprint • Integrated speed control • 100% oil-free for contamination-free transfer, discharge and compression
Pumps N 820 G and N 840 G: • Expandable: separators and/or capacitors can be purchased separately and easily installed • 3 colour status display: on / pause / error • Internal atmosphere according to ATEX II 2/-G IIB+H2 T3 • High compatibility with steam and condensation • Air ballast
• 100% oil-free, abrasion-free, no wearing parts • Frictionless operation: no particle generation • RS485 interface with Modbus RTU protocol for remote control of the pump • Noise level: 55 dBa • 10C version for increased chemical resistance